(0) Item Hello, Guest
Model Shipways Hull Planking Clamp Set of 6 (Less Than 3/16")
Model Shipways Hull Planking Clamp Set of 6 (Less Than 3/16")

Model Shipways Hull Planking Clamp Set of 6 (Less Than 3/16")

On sale: $6.99
Retail Price:$11.99
You Save:$5.00(42%)
In Stock- Ready to Ship
Part Number:MX103

Model Shapeways Hull Planking Clamps

Laser cut plywood planking clamps eliminate unsightly holes in you blukheads, and you won't waste time screwing in and removing threaded planking clamps. They also hold you planks firmly in place while you glue, drill, measure and taper.

Each clamp is 1" square, and includes a metal screw with wing nut and two 1/16" diameter Brass support rods. Assembly required.

Set of 6. Use with bulkheads less than 3/16" thick.

1 Stars
This item is pure junk. Does not work at all. The portion gripping the frame is about 1/4 inch, and does not grip tight enough to hold a strip of wood. It breaks easily when you try to tighten it. Model Expo should withdraw this item from it's inventory. I am a 25 year customer and have never seen a product this bad from Model Expo
Did you find this helpful?  12 of 13 Found Helpful
Reviewed by: (Verified Buyer)  from Sunnyvale. on 7/12/2017
4 Stars
I find these clamps indispensable for outer hull planking. I prefer to used an older style wood glue with a fairly long curing time. This would not be possible without these clamps to hold the plank in place. The range of movement of the "C" portion of the clamp is not high so you have to use a clamp that is very close to the width of the bulkhead you are attaching to. Overtightening will crack the tool (which is itself made of wood). So, you must use care with these but they will do the job.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from New Jersey. on 5/6/2018

Related Items

Recently Viewed Items